Rule List”, and then you can view and configure the
Bandwidth Control rules in the screen below.
Figure 5-23 Bandwidth Control Rule List
Description - The information of description include address range, the port range and
protocol of transport layer.
Egress Bandwidth - The max upload speed which through the WAN port, default number
is 0.
Ingress Bandwidth - The max download speed which through the WAN port, default
number is 0.
Enable - Rule status, show whether the rule takes effect.
Modify - Click Modify to edit the rule. Click Delete to delete the rule.
To add/modify a Bandwidth Control rule, follow the steps below.
1. Click Add New… shown in Figure 5-23, you will see a new screen shown in Figure 5-24.
2. Enter the information like the screen shown below.
Figure 5-24 Bandwidth Control Rule Settings
3. Click the Save button.
5.16 IP & MAC Binding
The configuration is similar to IP & MAC Binding Setting in 3G/4G Router mode. Please refer
to 4.16 IP & MAC Binding
.
-108-
To Next Page
Loading...
