4.10 DHCP
Figure 4-30 The DHCP menu
There are three submenus under the DHCP menu (shown in
Figure 4-30): DHCP Settings,
DHCP Client List and Address Reservation. Click any of them, and you will be able to
configure the corresponding function.
4.10.1 DHCP Settings
Choose menu “DHCP
DHCP Settings”, and then you can configure the DHCP Server on
the page (shown in
Figure 4-31).The router is set up by default as a DHCP (Dynamic Host
Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that
are connected to the router on the LAN.
Figure 4-31 DHCP Settings
DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must
have another DHCP server within your network or else you must configure the computer
manually.
Start IP Address - Specify an IP address for the DHCP Server to start with when
assigning IP addresses. 192.168.1.100 is the default start address.
End IP Address - Specify an IP address for the DHCP Server to end with when assigning
IP addresses. 192.168.1.199 is the default end address.
-43-
To Next Page
Loading...
