4.15 Advanced Routing
Figure 4-64 Advanced Routing
There are two submenus under the Advanced Routing menu as shown in Figure 4-64: Static
Routing List and System Routing Table. Click any of them, and you will be able to configure
the corresponding function.
4.15.1 Static Routing List
Choose menu “Advanced Routing
Static Routing List”, you can configure the static route
in the next screen (shown in Figure 4-65). A static route is a pre-determined path that network
information must travel to reach a specific host or network.
Figure 4-65 Static Routing
To add static routing entries:
1. Click Add New… shown in Figure 4-65, you will see the following screen.
Figure 4-66 Add or Modify a Static Route Entry
2. Enter the following data:
Destination Network - The Destination Network is the address of the network or host
that you want to assign to a static route.
-68-
To Next Page
Loading...
