1. Power off your modem (if the modem has a backup battery, please remove it too.), and
disconnect your existing router if you have one.
2. Connect the LAN4/WAN port on your Router to the Modem’s LAN port with an Ethernet
cable.
3. Power on the modem and wait for 2 minutes.
4. Make sure the WiFi ON/OFF switch is ON. Then plug the provided power adapter into the
Power jack and the other end to a standard electrical wall socket. Press the POWER
ON/OFF button to power on the Router. (Before you power on the Router, please make sure
your computer is NOT connected to any other wireless network.)
-8-
To Next Page
Loading...
