TP-Link TL-SG3210 - 9.2 Bandwidth Control

Choose the menu Multicast→MLD Snooping→Packet Statistics to load the following page.
The following entries are displayed on this screen:

Auto Fresh
Auto Fresh: Select Enable/Disable auto fresh feature.
Fresh Period:
Enter the time from 3 to 300 seconds to specify the
auto fresh period.

MLD Packet Statistics
Received MLD
Query :
Displays the number of MLD Query
packets the
switch has received.
Received MLDv1
Report:
Displ
ays the number of MLDv1 Report packets which
the switch has received.
Received MLDv2
Report:
Displays the number of MLDv2 Report packets which
the switch has received.
Received MLD Done:
Displays the number of MLD Done packets which the
switch has received.
Send MLD
Spec-Query:
Displays the number of MLD Specific Query packets
which the switch has sent.
135