Choose the menu System →System Tools →Config Backup to load the following page.
Figure 4-14 Config Backup
The following entries are displayed on this screen:
button to save the current configuration
as a file to your computer. You are suggested to take this measure
before upgrading.
Note:
It will take a few minutes to backup the configuration. Please wait without any operation.
4.3.3 Firmware Upgrade
The switch system can be upgraded via the Web management page. To upgrade the system is to
get more functions and better performance. Go to http:// www.tp-link.com to download the updated
firmware.
Choose the menu System →System Tools →Firmware Upgrade to load the following page.
Figure 4-15 Firmware Upgrade
Note:
1. Do not interrupt the upgrade.
2. Please select the proper software version matching with your hardware to upgrade.
3. To avoid damage, please do not turn off the device while upgrading.
4. After upgrading, the device will reboot automatically.
5. You are suggested to backup the configuration before upgrading.
31
To Next Page
Loading...
