TP-Link TL-SG3210 - Poe Config

PoE Config, mainly for PoE attributes configuration, is implemented on PoE Config and PoE
Time-Range ages.
10.1.1 PoE Config
On this page, you can configure the parameters to implement PoE function.
Choose the menu PoE→PoE Config→PoE Config to load the following page.
Figure 10-1 PoE Config
The following items are displayed on this screen:

Global Config
System Power Limit:
Specify the max power the PoE switch can supply.
Power Disconnect
Method:
When the supply power exceeds the system power limit, the PoE
s
witch guarantees the power supply with the following two
methods:
 Deny Next Port:
When the supply power exceeds the system
power limit, the newly-connected PD will be disconnected.

Deny Lower Priority: When the supply power exceeds the
system power limit, the PD linked to the port with lower
priority will be disconnected.
System Power
Consumption:
Displays the PoE switch's real time system power consumption.
Syste
m Power
Remain:
Displays the PoE switch's real time remaining system power.

Port Config
Port Select: Click the Select button to quick-
select the corresponding entry
based on the port number you entered.
Select: Select the desired port to configure its parameters.
155