TP-Link TL-SG3210 - 11.3 Policy Config

The following items are displayed on this screen:

Time-Range Table
Select: Select the desired entry to delete the corresponding time-range.
Index: Displays the index of the time-range.
Time-Range Name: Displays the name of the time-range.
Slice: Displays the time-slice of the time-range.
Mode: Displays the mode the time-range adopts.
Operation:
Click Edit to modify this time-range and click Detail
to display the
complete information of this time–range.
10.2.2 PoE Time-Range Create
On this page you can create time-ranges.
Choose the menu PoE→PoE Time-Range→PoE Time-Range Create to load the following page.
Figure 10-4 Time-Range Create
Note:
To successfully configure time-ranges, please firstly specify time-slices and then time-ranges.
The following items are displayed on this screen:

Create Time-Range
Name: Enter the name of the time-range for time identification.
Exclude Holiday:
Select Exclude Holiday, and the port based on this time-
range
may not supply power when the system time is within the holiday
Absolute: Select Absolute to configure absolute time-range. T
he port based
on this time-range will supply power based on this time-
range
when the system time is within the absolute time-range.
158