You can configure the system’s administrative IPv6 address on this page.
Choose the menu System →System Info →System IPv6 to load the following page.
Figure 4-10 System IPv6
The following entries are displayed on this screen:
Global Config
IPv6: Enable/Disable IPv6 function globally on the switch.
Link-local Address Config
Config Mode: Select the link-local address configuration mode.
Manual:
When this option is selected, you should assign a
link-local address manually.
Auto: When this option is selected,
the switch will generate a
link-local address automatically.
Link-local Address: Enter a link-local address.
26
To Next Page
Loading...
