Click Edit to display the following figure.
Figure 5-3 Port Mirror Config
The following entries are displayed on this screen.
Mirror Group
Number: Select the mirror group number you want to configure.
Mirroring Port
Mirroring Port: Select the mirroring port number.
Mirrored Port
Port Select: Click the Select button to quick-
select the corresponding port
based on the port number you entered.
Select: Select the desired port as a mirrored port. It is multi-optional.
Port: Displays the port number.
Ingress:
Select Enable/Disable the Ingress feature. When the Ingress is
, the incoming packets received by the mirrored port will
be copied to the mirroring port.
45
To Next Page
Loading...
