TP-Link TL-SG3210 - Chapter 6 VLAN

Choose the menu Switching → Traffic Monitor → Traffic Summary to load the following page.
Figure 5-10 Traffic Summary
The following entries are displayed on this screen:

Auto Refresh
Aut
o Refresh:
Allows you to Enable/Disable refreshing the Traffic Summary
automatically.
Refresh Rate
: Enter a value in seconds to specify the refresh interval.

Traffic Summary
Port Select
: Click the Select button to quick-select the corresponding port base
d
on the port number you entered.
Port
: Displays the port number.
Packets Rx
:
Displays the number of packets received on the port. The error
packets are not counted in.
Packets Tx
: Displays the number of packets transmitted on the port.
Octets Rx
: D
isplays the number of octets received on the port. The error octets
are counted in.
Octets Tx
: Displays the number of octets transmitted on the port.
56