13
Chapter 3
Set Up Internet Connection Via Quick Setup Wizard
3. 2. 2. Range Extender Mode
1. If you select Range Extender mode, the AP will automatically detect wireless networks within
its range. Find your host network in the AP list and click Connect.
2. Enter the host network’s password in the Wireless Password field. In the Local Wireless
Setting section, either customize your Local Wireless Network Name and Wireless Password
or keep the default ones, and then click Next.
3. Select the LAN IP type of the access point or leave the default setting Smart IP for most
cases, and then click Next.
4. Click Finish to complete the configuration.
To Next Page
Loading...
