22
Chapter 4
Congure the Access Point
• Default Gateway (Optional) - It is suggested to input the IP address of the LAN port of
the access point. The default value is 192.168.0.254.
• Default Domain (Optional) - Input the domain name of your network.
• Primary DNS (Optional) - Input the DNS IP address provided by your ISP.
• Secondary DNS (Optional) - Input the IP address of another DNS server if your ISP
provides two DNS servers.
Note:
• To use the DHCP server function of the access point, you must configure all computers on the LAN as
Obtain an IP Address automatically.
• When you choose Smart IP (DHCP) in Network > LAN, settings of the DHCP server is unchangable. You
will see the page as below.
4. 3. 3. DHCP Client List
1. Visit http://tplinkap.net, and log in using the password you created.
2. Go to DHCP > DHCP Client List to view the information of the clients connected to the access
point.
• Client Name - The name of the DHCP client.
• MAC Address - The MAC address of the DHCP client.
• Assigned IP - The IP address that the access point has allocated to the DHCP client.
• Lease Time - The time of the DHCP client leased. After the dynamic IP address has
expired, a new dynamic IP address will be automatically assigned to the user.
You cannot change any of the values on this page. To update this page and show the
current attached devices, click Refresh.
To Next Page
Loading...
