38
Chapter 4
Congure the Access Point
4. 4. 6. Wireless Statistics
The configuration for each operation mode is almost the same, we take Access Point
mode for example here.
1. Visit http://tplinkap.net, and log in using the password you created.
2. Go to Wireless > Wireless Statistics to check the data packets sent and received by each
client device connected to the access point.
• MAC Address - The MAC address of the connected wireless client.
• Current Status - The running status of the connected wireless client.
• Received Packets - Packets received by the wireless client.
• Sent Packets - Packets sent by the wireless client.
• Configure - The button is used for loading the item to the Wireless MAC Filtering list.
• Allow - If the Wireless MAC Filtering function is enabled, click this button to
allow the client to access your network.
• Deny - If the Wireless MAC Filtering function is enabled, click this button to
deny the client to access your network.
4. 4. 7. Throughput Monitor
1. Visit http://tplinkap.net, and log in using the password you created.
2. Go to Wireless > Throughput Monitor to view the wireless throughput information.
To Next Page
Loading...
