10
Chapter 2
Connect to the Internet
Note: If the above screen does not appear, please refer to FAQ > Q3.
4. After successful login, select Repeater mode and follow Quick Setup to complete the
configuration.
Tips: Click Survey to choose your host network and fill in its wireless password.
5. Relocate: Place the router between your host router and the Wi-Fi dead zone. The location
you choose must be within the range of your existing host network.
Extended NetworkHost Network
Client
Host Router Range Extender
6. Enjoy! The extended network shares the same SSID (wireless name) and password as your
host network.
2. 2. 3. Access Point Mode
This mode transforms your existing wired network to a wireless network.
ClientAccess PointWired Host Router
Ethernet4Ethernet3Ethernet1 Ethernet2Internet
Internet
1. Connect the power adapter to the router and turn on the router.
2. Connect the router to your wired host router’s Ethernet port via an Ethernet cable as shown
above.
3. Connect a computer to the router via an Ethernet cable or wirelessly by using the SSID
(Network Name) and password printed on the label at the bottom of the router.
To Next Page
Loading...
