54
Chapter 4
&RQƮJXUHWKH5RXWHULQ6WDQGDUG:LUHOHVV5RXWHU
3. Enter the MAC address and IP address.
4. Click
Save.
¾ To modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click
Modify or Delete in the Modify column.
¾ To find an existing entry:
1. Click
Find.
2. Enter the MAC address or IP address in the corresponding field.
3. Click Find on this page as shown below.
4. 14. 2. ARP List
To manage a device, you can observe the device on the LAN by checking its MAC
address and IP address on the ARP list, and you can also configure the items. This page
displays the ARP list which shows all the existing IP & MAC Binding entries.
To Next Page
Loading...
