TP-Link TL-WR940N - DHCP Client List

85
Chapter 5
&RQƮJXUHWKH5RXWHULQ$FFHVV3RLQW0RGH
• Default Gateway (Optional) - It is suggested to input the IP address of the LAN port of
the router. The default value is 192.168.0.254.
•
Default Domain (Optional) - Input the domain name of your network.
•
Primary DNS (Optional) - Input the DNS IP address provided by your ISP.
•
Secondary DNS (Optional) - Input the IP address of another DNS server if your ISP
provides two DNS servers.
Note:
• To use the DHCP server function of the router, you must configure all computers on the LAN as
Obtain
an IP Address automatically
.
• When you choose
Smart IP (DHCP) in Network > LAN, the DHCP Server function will be disabled. You will
see the page as below.
5. 6. 2. DHCP Client List
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to
DHCP > DHCP Client List to view the information of the clients connected to the router.
• Client Name - The name of the DHCP client.
•
MAC Address - The MAC address of the DHCP client.
•
Assigned IP - The IP address that the outer has allocated to the DHCP client.
•
Lease Time - The time of the DHCP client leased. After the dynamic IP address has
expired, a new dynamic IP address will be automatically assigned to the user.