TP-Link TL-WR940N - Page 29

24
Chapter 4
&RQƮJXUHWKH5RXWHULQ6WDQGDUG:LUHOHVV5RXWHU
• User Name/Password - Enter the user name and password provided by your ISP.
These fields are case-sensitive.
•
Confirm Password - Enter the Password provided by your ISP again to ensure the
password you entered is correct.
•
Connect/Disconnect - Click this button to connect or disconnect immediately.
•
Dynamic IP/ Static IP - Select either as required by your ISP. If Static IP is selected,
please enter the IP address, subnet marsk, gateway and DNS also provided by your
ISP.
•
Internet IP Address/ Internet DNS - The internet IP address and DNS server address
assigned by L2TP server.
•
Connection Mode
• Connect on Demand - In this mode, the internet connection can be terminated
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the internet again. If you want to keep
your internet connection active all the time, please enter 0 in the
Max Idle Time
field. Otherwise, enter the number of minutes you want to have elapsed before
your internet access disconnects.
• Connect Automatically - The connection can be re-established automatically
when it is down.
•
Connect Manually - You can click Connect/Disconnect to connect/disconnect
immediately. This mode also supports the
Max Idle Time function as Connect
on Demand
mode. The internet connection can be disconnected automatically
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the internet again.
Note:
Sometimes the connection cannot be terminated although you have specified the
Max Idle Time because some
applications are visiting the internet continually in the background.