168
450Mbps High Power Wireless N Router
5) How to enable H323 ALG: Log in to the router, Go to “Advanced→Security→Basic
Security”. On the “Basic Security” page, check the Enable radio button next to H323
ALG. Remember to click the Save button.
Figure A-7 Basic Security
4. I want to build a WEB Server on the LAN, what should I do?
1) Because the WEB Server port 80 will interfere with the WEB management port 80 on
the router, you must change the WEB management port number to avoid interference.
2) To change the WEB management port number: Log in to the router, Go to “Advanced
→Security→Remote Management”. On the "Remote Management" page, type a
port number except 80, such as 88, into the "Web Management Port" field. Click Save
and reboot the router.
To Next Page
Loading...
