14Chapter 2 . Congure Touch P5 as a Router
Beacon Interval: Enter a value between 40 and 1000 in milliseconds to determine the duration between beacon packets that
are broadcasted by your Touch P5 to synchronize the wireless network. The default is 100 milliseconds.
RTS Threshold: Enter a value between 1 and 2346 to determine the packet size of data transmission through your Touch P5. By
default, the RTS (Request to Send) Threshold size is 2346. If the packet size is greater than the preset threshold, your Touch P5
sends Request of Send frames to a particular receiving station and negotiates the sending of a data frame, or else the packet
will be sent immediately.
DTIM Interval: This value determines the interval of the DTIM (Delivery Traffic Indication Message). Enter a value between 1 and
15 beacon intervals. The default value is 1, indicates the DTIM Interval is the same as Beacon Interval.
Group Key Update Period: Enter the number of seconds (minimum 30) to control the time interval for the encryption key
automatic renewal. The default is 0, indicating no key renewal.
Enable WMM: The WMM function guarantees the packets with high-priority messages being transmitted preferentially. It is
enabled by default and highly recommended.
Enable Short GI: This function is enabled by default and recommended to increase the data capacity by reducing the GI (Guard
Interval) time.
Enable AP Isolation: If you want to confine and restrict all wireless devices connected to your network from interacting with
each other, but still able to access the Internet, select the Enable AP Isolation checkbox.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
