64Chapter 3 . Congure Touch P5 as a Repeater
3. 1 Quick Setup
You can log in and manage your Touch P5 through the touchscreen or web-based utility.
Option 1: Through Touchscreen Utility (Recommended)
The Quick Setup app on the touchscreen will guide you through the process to connect your Touch P5 to the front host
network and set up its extended network.
1. Install the antennas and position them vertically.
2. Plug your Touch P5’s power adapter into an electrical outlet near your host network, then turn on it and wait until the
system boot on the screen completes.
3. On the menu screen, tap the Mode Selection icon to open it.
4. Select Repeater mode and tap Save.
Note: Your Touch P5 will reboot to make your changes take effect, and please do NOT operate during the process.
5. Go to the menu screen and tap the Quick Setup icon to open it.
6. Set your Region and tap Next.
To Next Page
Loading...
