Notes
User manual
Text passages marked with this symbol contain important information which must be
observed if the machine is to operate safely and without problems.
j
This symbol marks text passages which provide supplementary notes and background
information; they are intended to help the user understand how to get the best out of the
machine.
Symbols and notes on the back of the MP 200
This symbol marks alternating voltages (AC).
The AC voltage required for the device can be found on the printing at the mains input
socket. Do not connect the device to other power supplies.
This symbol marks the protective earth connector (ground connection).
The unit is designed for operation at a protective earth conductor socket.
The device is designed to operate in altitudes up to 2000 m above sea level.
The device is designed to operate in a temperate climate.
The range of permissible operating temperatures is +10 … +35°C.
The only permissible method of disposing of this product is to take it to your local col-
lection centre for electrical waste.
All the components we use meet the German and European safety norms and stan-
dards which are currently valid. This product complies with the EU directives. The
declaration of conformity can be downloaded from www.ta-hi.com/DoC.
This product contains a class 1 laser diode. To ensure continued safety, do not remove
any covers or attempt to gain access to the inside of the product.
Refer all servicing to qualied personnel.
8
To Next Page
Loading...
Need help?
General
