TR-Electronic LP-38 - 8 Causes of Faults and Remedies

Causes of faults and remedies
 TR-Electronic GmbH 2003, All Rights Reserved Printed in the Federal Republic of Germany
Page 22 of 22 TR - ELA - TI - GB - 0040 - 06 02/13/2017
8 Causes of faults and remedies
Fault
Cause
Remedy
Position skips
of the measuring
system
Strong vibrations
Vibrations, impacts and shocks, e.g. on presses must be
avoided or the limit values must not be exceeded.
Electrical faults
EMC
Cables with twisted pair wires for data and supply must be
used. Shielding and wire routing must be performed
according to the DeviceNet-specification.
Scanning defect.
Replace measuring system.