35 MN1007-C
Selection of the option provides the operator with a screen showing the current integration period in seconds.
The +/- keys (
/ ) may now be used to adjust the period within the range 0 to 600 seconds.
Note. In the unlikely event that the user wishes to disable the integration button function, then setting the
integration period to “0” will render the Rate/Int/Stop
key non-operational.
Pressing the Select
key will commit the setting to memory and return the instrument to rate mode.
Mode and period parameters are retained in non-volatile memory. The instrument’s configuration therefore survives
power-cycle so that setup following power-on is unnecessary.
To Next Page
Loading...
General