TraffiCast BlueTOAD Spectra User Manual

Appendix—How to Create an RSU MAP File
TrafficCast Quick Start—BlueTOAD Spectra and Spectra RSU
4-2 Revision 02 May 2019
5. Center the view on the intersection and click the Builder icon.
6. Put the Reference Point Marker in the center of the intersection.
7. The Reference Point Configuration menu should open after you place the Reference Point Marker.
If the menu does not open, left click on the Reference Point Marker to open it.
8. In the Type field, select (1) Signal as the Intersection Type and click Done.

TraffiCast BlueTOAD Spectra Specifications

General

Brand	TraffiCast
Model	BlueTOAD Spectra
Category	Controller
Language	English