8. Filed setting
35SS-SVM001A-EM
Parameters can be checked in the following table below.
Note:
The right is therefore reserved to EE changing without notice.
Parameter
code
Descriptions
P. 0 Fault codes
P. 1 Compressor actual frequency
P. 2 Compressor driving frequency
P. 4 Compressor target frequency
P. 5 Compressor exhaust temperature
P. 6 Outdoor suction temperature
P. 7 Outdoor ambient temperature
P. 8 Outdoor coil temperature
P. 9 Outdoor defrosting temperature
P. 1 0 IPM module temperature
P. 11 Outdoor capacity requirement
P. 1 3 Outdoor DC Motor target speed
P. 1 4 AC input current
P. 1 5 AC input voltage
P. 1 6 DC bus voltage
P. 1 7 Compressor phase current
P. 1 8 Frequency limit code
P.20 Target suction overheating
P.21 Target exhaust overheating