Trane GAF2A0A36M31EC - Start Up; System Start Up Procedure

29
Section 17. Start Up
STEP 2 - Set the system thermostat to OFF.
STEP 3 - Turn on electrical power disconnect(s) to
apply power to the indoor and outdoor units.
STEP 4 - Set the system thermostat to ON.
OFF
D
O
N
E
CANCEL
ON
OFF
ON
D
O
N
E
CANCEL
STEP 1 - Make sure all panels are securely in place
and that all wiring has been properly dressed and
secured.
17.1 System Start Up