RT-SVP04F-EN 49
System Operating Status
RTM Outside Air Humidity 55%
ECEM Return Air humidity
46%
Used With: All units with AS
Economizer installed.
"RA Humidity" shown only if
Comparative Enthalpy is installed
Possible Values: 10 - 90%
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
3. Press the + (Plus) key while viewing any screen to add that
screen to the custom menu. Refer to the custom menu for the
creation and maintenance of customized menus.
4. Press the NEXT key until the following screen is displayed.
(if applicable)
RTM Space Humidity 10% Used With: All units with
DeHumidification or Humidification
options installed.
Possible Values: 10 - 90%
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
3. Press the + (Plus) key while viewing any screen to add that
screen to the custom menu. Refer to the custom menu for the
creation and maintenance of customized menus.
4. Press the NEXT key until the following screen is displayed.
(if applicable)
ECEM Space Pressure Input 0.08 IWC Used With: All Units when Power
Exhaust with Statitrac is installed or
Return Fan with Statitrac installed.
Possible Values: -0.67 to 0.67 IWC
1. Press the NEXT key until the following screen is displayed. (if applicable)
VCM Outside Air Flow Input 350.0 CCFM Used With: All Units when VCM is
installed
Possible Values: 0 to Max Unit Air
Flow Refer to the table in the
SETPOINT section, "Default Min OA
Flow SETPOINT Screen" for max
airflow SETPOINTs. (if applicable)
1. Press the NEXT key until the following screen is displayed.
VCM CO
2
Level Input 1512 PPM Used With: All Units when VCM is
installed and C02 Reset is enabled or
DCV is enabled
Possible Values: 50 to 2000 PPM
1. Press the NEXT key until the following screen is displayed
To Next Page
Loading...
