28 RT-SVP04F-EN
System Operating Status
Dehumidification Status:
by Comfort Control Override is Active
DISABLED Used With: All IntelliPak with
Dehumidification option installed.
1. Pressing the NEXT key will scroll forward through the screens. Top Line Possible Values:
ENABLED, DISABLED
Bottom line Possible Values: See
below
2. Pressing the PREVIOUS key will scroll backwards to view the
previously displayed screen.
3. Press the NEXT key until the following screen is displayed.
(if applicable)
by Call for Cooling Demand Limit If 1st line is "DISABLED"
by Compressor Lockout Sources If 1st line is "DISABLED"
by Occ Dehumid Function Disable If 1st line is "DISABLED"
by Dehumid Override Zone Temp High If 1st line is "DISABLED"
by OA Temperature Out Of Range If 1st line is "DISABLED"
by Unocc Dehumid Function Disable If 1st line is "DISABLED"
by Comfort Control Override is Active If 1st line is "DISABLED"
by Required Sensor Failure Condition If 1st line is "DISABLED"
by Insufficient Airflow Condition If 1st line is "DISABLED"
by Sat Reheat Cond Temp Sensor Fail If 1st line is "DISABLED"
By Reheat Head Pressure High Limit If 1st line is "DISABLED"
(Blank) If 1st line is "ENABLED"
Condenser Coil Purge is Active If 1st line is "ENABLED"
Humidification
Status:
Humidification is
Active
ENABLED Used With: Used With: All units
with Humidification option installed.
Key Stroke Operation (1)
1. by Occ Humidification Function Disable
2. by Unocc Humidification Function Disable
3. Humidification is Inactive
4. Humidification is Active
Possible Values: ENABLED,
DISABLED
by Occ Humidification Function
Disable (If 1st line is "DISABLED"),
by Unocc Humidification Function
Disable (If 1st line is "DISABLED"),
Humidification is Inactive (If 1st line
is "ENABLED" and output is de-
energized, Humidification is Active
(If 1st line is "ENABLED" and output
is energized)
1. Press the NEXT key until the following screen is displayed. (If
applicable)
End of Submenu (NEXT) to Enter STATUS
1. Press the NEXT key to leave the submenu and show following
screen.
2. Press PREVIOUS to page back through the submenu.
To Next Page
Loading...
