RT-SVP04F-EN 25
STATUS Menu
The STATUS menu is used to view various operating conditions such as temperatures
and humidity levels. It’s used to view unit component status such as fan, compressor,
heater, and economizer operation, as well as SETPOINT status.
The screens shown in this section are for example only. Pressing the + (Plus) key while
viewing any of the status display screens will add that screen to the Custom menu.
When a status screen is displayed for 30 minutes without a key being pressed, the LCD
screen will revert to the general operating status display. If this happens, press the
STATUS key again to return to the status menu. The following are examples of status
screens that may be viewed by pressing the STATUS key.
Note: Many of the screens displayed in this section are applicable only for the options
that are installed in the unit and may not be visible on your unit.
Press the STATUS key to begin viewing the status screens.
Note: The range for all temperature inputs is –40 to 200 F. “ERR” will appear if the
temperature is out of range.
System Operating Status
VAV OA FLOW
OCCUPIED
*350.0 CCFM OA
DMPR 0%
SUPPLY FAN ON
DIAGNOSTICS
Notes: *VCM only - if the unit does not have
a VCM this section of the screen is
blank.
1. Press the NEXT key until the following screen is displayed.
GENERAL SYSTEM STATUS SUBMENU SCREENS
General System Status Submenu
Press ENTER to View Data in this Submenu
Used With: All Units
1. Pressing the NEXT key will bypass this section.
Active Unit Control Source:
Active Cluster Member Role:
XXXXXXXXXXXX
XXXXXXXXXX
Used With: All Units
Possible Values: Source = Local,
BAS/Network
Role = Standalone, Slave, Master
1. Pressing the NEXT key will scroll forward through the screens.
2. Pressing the PREVIOUS key will scroll backwards to view the previously displayed screen.
3. Press the + (Plus) key while viewing any screen to add that screen to the custom menu. Refer to the custom
menu for the creation and maintenance of customized menus.
4. Press the NEXT key until the following screen is displayed. (if applicable)
To Next Page
Loading...
