Trane RTAF-SVX001K-EN - Start-Up, Shutdown, and Operation Sequences

RTAF-SVX001K-EN 57
Pre-Start
Upon completion of installation, complete the Sintesis™
RTAF Installation Completion Check Sheet and Request
for Trane Service checklist in chapter “Log and Check
Sheets,” p. 98.
Important: Start-up must be performed by Trane or an
agent of Trane specifically authorized to
perform start-up and warranty of Trane
products. Contractor shall provide Trane (or
an agent of Trane specifically authorized to
perform start-up) with notice of the
scheduled start-up at least two weeks prior
to the scheduled start-up.