40
BAS-SVX090B-EN
Table 4. Marquee LED status and error codes (continued)
LED Blink Pattern
Message Description Action by User
51 Backup Retored Database backup has been restored. None- normal operation
52 Updating Firmware Updating the firmware. None- normal operation
53 Firmware Updated Firmware was updated. None- normal operation
55 Updating Firmware Firmware is currently being updated. None- normal operation
56 Updating Kernel The kernel is currently being updated. None- normal operation
58 Updating Device Tree The kernel is currently being updated. None- normal operation
61 Updating Bootloader The bootloader is being updated. None- normal operation
63 Updating Recovery The recovery file system is being updated. None- normal operation
Red LED Blink Pattern
12 Load Field Fail
Attempted load of the field kernel or device tree failed.
1. Thumb drive with .scfx file, power
down, set address rotaries to 991, and
power up.
2. Replace controller.
15 Load Recovery Fail Attempted load of the recovery image failed. Replace controller
18 Field Mount Fail Failed to mount the field partition during a firmware
update attempt.
1. Thumb drive with .scfx file, power
down, set address rotaries to 991, and
power up.
2. Replace controller.
19 Bad Switch Setting Rotary switches are set to a bad/unknown value. Contact technical support.
21 Bad Firmware File Unable to mount the firmware update file. Download firmware file again and retry
download.
22 Firmware Not Compatible Firmware file downloaded is not compatible with this
hardware.
Download the correct FW file for the
controller.
24 Field Format Fail Failed to reformat the field file system. Replace controller.
25 Field Attach UBI Fail Failed to attach (UBI) to the field file system. Replace controller.
26 Field Mount Fail Failed to mount the field file system. Replace controller.
27 Bad Update Method Don’t know what our update method is. Contact technical support.
31 No Firmware File Found
Unable to find a firmware update file.
Thumb drive has no .scfx file. .scfx file
must be located at the root of the USB
drive.
32 Multiple Firmware Found Multiple firmware update files were found. Too many .scfx files on the thumb drive.
Can only have on .scfx file and must be
located in the root of the USB drive.
34 Firmware Invalid Download the firmware file again and retry
download.
39 Firmware Invalid Download the correct FW file again and
retry download.
42 Bad Firmware File Unable to mount the firmware update file. Download the firmware file again and retry
download.
44 Restore Failed Database restore failed for some reason.
Try to restore using a different backup file
(Restore file may be corrupt).
48 Hold Crashed too many times and are now “holding.” Contact technical support.
49 Abnormal Termination The embedded application terminated abnormally. Contact technical support.
54 Firmware Not Compatible The firmware file downloaded is not compatible with
this hardware.
Download the correct FW file for the
controller.
Operation
To Next Page
Loading...
