Illustration 6.7 The UDC Terminals on the Circuit Board
H7 and H8
Remove the IP20 front cover to access the terminals
directly on the power card MK900.
Illustration 6.8 Power Card
Illustration 6.9 +/- UDC Terminals
H9
The UDC terminals are available on connectors at the
bottom of the frequency converter. Static measurements
can be done directly from here.
Illustration 6.10 UDC Terminals Location on H9 Frequency
Converter
Test Procedures
50 02/2017 All rights reserved. BAS-SVM04B-EN
6
To Next Page
Loading...
