Trane TR170 - RFI Filter

1Foil
2Bus bar
3Plastic cover
4 Rectier modules
Illustration 7.19 Rectier Modules
7.5.5 RFI Filter
1. Remove the 3 screws (T20) from the small EMC
shield.
2. Remove the EMC shield.
3. Loosen left cable connector using a hex 8 key.
4. Remove the 4 screws (T20) from the
lter.
5. Remove the entire lter assembly.
Reinstall in the reverse order.
1RFI lter
2Screws
3EMC shield
Illustration 7.20 RFI Filter
H-Frame Size Disassembly a...
68 02/2017 All rights reserved. BAS-SVM04B-EN
7
7