Trane TR170 - Power Card Mounting Plate

8.3.2 Power Card
1. Unplug and remove the LCP ribbon cable.
2. Unplug all other cables from the power card.
3. Remove 3 screws (T20) on the power card.
4. Remove the power card.
Reinstall in the reverse order.
1Power card
Illustration 8.10 Power Card
8.3.3 Power Card Mounting Plate
1. Remove 4 screws (T20) from the power card
mounting plate.
2. Remove the power card mounting plate with the
fan attached.
Reinstall in the reverse order.
1 Power card mounting plate
Illustration 8.11 Power Card Mounting Plate
I-Frame Size Disassembly an...
80 02/2017 All rights reserved. BAS-SVM04B-EN
8
8