7.4.9 DC Coil
1. Remove the 4 screws (T20) from the DC coil cover
plate.
2. Remove the 4 screws (T20) from the heat sink.
3. Remove the heat sink.
4. Remove 4 screws (T20) from each of the 2 DC
Coils.
5. Remove the coils.
Reinstall in the reverse order.
1 DC coil cover plate
2Heat sink
3DC coil
Illustration 7.14 DC Coil
7.4.10 Capacitor Bank
1. Remove the foil.
2. Remove the 6 screws on the base plate.
3. Remove the base plate.
4. Remove the 4 screws (T20) from the capacitor
mounting plate.
5. Remove the mounting plate.
6. Turn the capacitor bank upside-down.
7. Remove the hex nut with a hex 19 key.
8. Remove the capacitor.
Reinstall in the reverse order.
1Foil
2 Base plate
3 Capacitor bank
Illustration 7.15 Capacitor Bank
H-Frame Size Disassembly a... TR150 and TR170 Service Manual
BAS-SVM04B-EN 02/2017 All rights reserved. 65
7
To Next Page
Loading...
