Trane TR170 - RFI Filter; I7 Frame Size Disassembly and Assembly Instructions; Control Card and Control Card Mounting Plate

8.2.8 RFI Filter
1. Remove 2 screws (T20) from the lter.
2. Lift out the lter.
Reinstall in the reverse order.
1RFI lter
Illustration 8.8 RFI Filter
8.3 I7 Frame Size Disassembly and
Assembly Instructions
8.3.1 Control Card and Control Card
Mounting Plate
1. Remove 2 screws (T20) from the 2 cover plates.
2. Remove the LCP cradle.
3. Remove 3 screws (T10) from the control card.
4. Remove the control card.
5. Remove 2 screws (T20) from the bracket next to
the control card mounting plate.
6. Remove 4 screws (T20) to remove the control
card mounting plate.
7. Unplug the LCP ribbon cable.
8. Remove the control card mounting plate.
Reinstall in the reverse order.
1LCP and cradle
2 Control card and mounting plate
3EMC shield
4Terminal plates
5EMC shield
Illustration 8.9 Control Card Mounting Plate
I-Frame Size Disassembly an... TR150 and TR170 Service Manual
BAS-SVM04B-EN 02/2017 All rights reserved. 79
8
8