Trane TR170 - Inrush Card; Bus Bar

8.3.4 Inrush Card
1. Unplug all cables.
2. Remove 6 screws (T20) from the inrush card.
3. Remove the inrush card.
Reinstall in the reverse order.
1Inrush card
Illustration 8.12 Inrush Card
8.3.5 Bus Bar
1. Unplug and remove the red/black cable.
2. Remove the black plastic cover.
3. Remove 8 screws (T20) from the support bracket.
4. Remove the bus bar assembly.
Reinstall in the reverse order.
1Bus bar
Illustration 8.13 Bus Bar
I-Frame Size Disassembly an... TR150 and TR170 Service Manual
BAS-SVM04B-EN 02/2017 All rights reserved. 81
8
8