Features and
Benefits
UNT-PRC001-EN64
Basic Series Fan-Coil
Sizes 04-08
The basic series fan-coil design is for the
market that requires only the
basic
features of our standard UniTrane
®
fan-
coil. Basic series units are horizontal
concealed and are available with an
exposed fan, plenum, or ceiling access
panel.
The basic series unit features include:
• Quality
• Three or four-row coils
• Ship loose ball valves
• Ship loose fan mode switch
Quality
Built with the same high quality as the
UniTrane
®
, coils and control end devices
are tested thoroughly before units are
shipped.
Coils are air and leak-tested before being
mounted in the unit.
All control end devices, fans, and motors
are tested on assembled units.
Three or four-row coils
Three or four-row coils allow design of
two and four-pipe systems.
Ship-loose ball valves
Ball valves are ship-loose accessories for
field piping.
Ship-loose fan mode switch
Control options are simple. Units can be
built with either no controls or a wall-
mounted fan mode switch.
Basic Series
To Next Page
Loading...
