16 BAS-SVU10C-EN
User Programming Instructions Menu
The Trane Communicating Thermostat features an intuitive, menu-driven, back-lit LCD display that
walks users through the programming steps, making the programming process extremely simple.
This menu is typically accessed by the user to set the parameters such as temperature and time
events, system mode, fan mode, and so on.
It is possible to bring up the user menu at any time by depressing the MENU key. The status display
automatically
resumes af
ter exiting the user-programming menu.
If the user pauses at any given time during
programming, Auto Help text is displayed to help and
guide the user through the usage and programming of the thermostat.
Example: Press yes key to change cooling temperature
setpoint.
Use the up or down arrow to adjust cooling setpoint.
Each of th
e sections in the menu are accessed and programmed
using five keys on the thermostat
cover.
The priority for the alarms is as follows:
The YES key is used to confirm a selection, to move onto the next menu item and to manually scroll
through the displayed information.
The NO key is used when you do not desire a parameter change, and to advance to the next menu
item. It can also be used to toggle between heating and cooling setpoints.
The MENU key is used to access the Main User Menu or exit the menu.
The down arrow key is used to decrease temperature setpoint and to adjust the desired values when
programming and configuring the thermostat.
The up arrow key is used to increase temperature setpoint and to adjust the desired values when
programming and configuring the thermostat.
When left unattended for 45 seconds, the display will resume automatic status display scrolling.
To turn on the back light, press any key on the
front panel. The back lit display will turn off when
the thermostat is left unattended for 45 seconds.
To Next Page
Loading...
