Transcend DrivePro 200 - Page 22

v2.0
22
3. Select Upgrade Firmware from the Settings menu, and press to start the firmware
detection process. The DrivePro will automatically find the latest firmware file. Select Confirm
to complete firmware upgrade process.
WARNING: NEVER remove the power cord or the microSD memory card while the
firmware is being upgraded.
1. DrivePro will shut down and the red LED light will flash while the firmware is being
upgraded. After the upgrade is complete, the DrivePro will restart automatically.
2. If the DrivePro cannot be turned on due to firmware upgrade failure, please contact
Transcend customer service for technical support.