Transcend DrivePro 200 - 9. Settings

v2.0
19
VIDEO OUT
To play recorded files on a TV set:
1. Connect the DrivePro to your TV using the video cable.
2. Press the Settings button on the DrivePro.
3. Use / to select Video Out and press .
4. Use / to select the TV type based on your region (NTSC or PAL) and press .
5. Press to return to the recording screen and press the Browse button .
6. Use / to select either Normal Files or Emergency Files and press .
7. Use / to select the desired video file and press .
To disable playback on a TV set:
1. Press the Settings button on the DrivePro.
2. Use / to select Video Out and press .
3. Use / to select Disable and press .
4. Remove the video cable from your TV and the DrivePro.
9. Settings︱
In the Settings menu, you can adjust settings such as video resolution, recording time and G-Sensor
sensitivity. You can also set the date/time, change interface language, format memory card, and upgrade
firmware.
1. Press the Settings button
.
2. Use / to select the menu option and press .