Transcend DrivePro 200 - Set the Date and Time

v1.5
49
LED Indicator Reference Chart
LED Status Definition
Solid Red Standby (Wi-Fi Off)
Flashing Red Recording (Wi-Fi Off)
Solid Blue Standby (Wi-Fi On)
Flashing Blue Recording (Wi-Fi On)
Set the Date and Time
To set the current date and time:
1. During video recording, press the Settings button .
2. Use / to select Date/Time Settings and press .
3. Use / to adjust the value and press to move to the next field.
4. Repeat step 3 above until the date and time settings are complete.