Trek 2022 SESSION - Adjust the progression; 20% progression (softer); 25% progression (firmer)

2022 Session Service Manual
11
Adjust the progression
TheshockMinoLinkchipcanbeippedtonetunetheshockperformancefortheterrainorriderpreference.
20% progression (softer) 25% progression (rmer)
Position the Mino Link chip with 20% on top
• More reactive to repeated fast mid-size bumps and
square-edge hits
Position the Mino Link chip with 25% on top
• More bottom out resistance over big hits and drops
Tools
• 6mm hex tool
• Torque wrench with 6mm hex bit
1. Make sure the Mino Links on the rocker plates are in the low position.
For instructions, see the Adjust the geometry section on page 6.
2. Remove the lower shock bolt. For the location, see the Shock mounts section on page 10.
3. Flip the shock Mino Link chip to the desired position.
4. Re-installthelowershockboltandtorqueto10Nm.