Trek 2022 SESSION - Specifications; Chainline (1 x only); Chainring (1 x only); Rear brake mount

2022 Session Service Manual
14
Specications
Chainline (1x only)
55.5–58.5mm
Chainring (1x only)
Minimum 32T
Maximum 38T
Rear brake mount
Minimum 180mm, direct mount
Maximum 220 mm
Maximum tyre size
Notice: Measurements of actual tyres may vary. Always
verifythereissufcientclearancebetweenthetyreand
the frame. Improper tyre size could damage the bicycle
frame. Trek recommends 6mm clearance above and on
the sides of the tyre.
Wheel set Maximum tyre size
29" 29.0" x 2.60"
27.5" 27.5" x 2.60"
Combination of
29" and 27.5"
27.5” x 2.60”
Seat post
WARNING
Always follow the seatpost manufacturer’s minimum
insertion recommendation. Failure to follow the recom-
mendation could cause damage to the seatpost and
result in injury to the rider.
1
3
2
Item Measurement
1 Maximum
insertion
R1 frame 131 mm
R2 frame 167 mm
R3 frame 170 mm
2 Minimum insertion 75mm*
3 Diameter 31.6 mm
*Follow the seatpost manufacturer guidelines.
Bottom bracket
• BSA83 threaded