T9
-11-
Fixing Points for Accessories
The router has three threaded holes M6 in its
base that allow fitting of accessories and also
fitting to router tables.
A whole range of accessories are shown in the
Trend Routing Catalogue.
Stationary use
When the T9 is used in a stationary position with
a no volt release switch (ref. NVRS/230V or
NVRS/230V/EUR) fitted, a trigger lock (ref.
T9/LOCK) is available which will lock the trigger
in the ‘on’ position.
The trigger lock must only be
used with the router in a
stationary position and with a
no volt release switch fitted.
To Next Page
Loading...
