Dear Customer
Thank you for purchasing this Trend product, we
hope you enjoy many years of creative and
productive use.
Please remember to return your guarantee card
within 28 days of purchase.
CONTENTS
TECHNICAL DATA _____________________1
SAFETY ____________________________2-3
ELECTRICAL SAFETY _________________4
MANUFACTURERS DECLARATION ______5
ITEMS ENCLOSED ____________________5
DESCRIPTION OF PARTS_______________6
ASSEMBLY & ADJUSTMENT
– Dust Extractor Spout __________________7
– Switching On & Off____________________7
– Depth of Cut_________________________8
– Fitting & Removing Cutters _____________9
– Speed Control ______________________10
– Fine Height Adjuster _________________10
– Fixing Points________________________11
OPERATION
– Cutting Direction & Feed Speed ________12
– Side-fence Routing___________________13
– Template Guide Bush Fitment __________14
– Template Guide Bush Routing __________15
– Beam Trammel Routing _______________16
– Bearing Guided Cutters _______________17
– Freehand Routing ___________________18
– Batten Routing ______________________18
MAINTENANCE & CARE_______________19
RECYCLING _________________________19
GUARANTEE ________________________19
SPARE PARTS
– Spare Parts List _____________________20
– Spare Parts Diagram _________________23
T9
-1-
TECHNICAL DATA
Voltage: UK & Eire 230V
UK & Eire only 110V
Europe 230V
Power input 1800W
No load speed (min) 8,000-22,000 rpm
Router carriage 2 columns
Router carriage stroke 75mm
Revolver depth stop 3-step, turret stop
adjustment with
graduation
Collet size: UK & Eire
1
/4 inch (6.35mm)
&
1
/2 inch (12.7mm)
Europe: 8mm & 12mm
Cutter diameter, max 75mm
Weight 5.2kg
Fuse: UK & Eire 230V 13A in plug
UK & Eire 110V 16A in mains
Europe 230V 10A in mains
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
If y
ou require further technical
information or spare parts, please call
our technical support department on
01923 224681.
To Next Page
Loading...
