Virtual LAN: Choose to Enable or Disable the VLAN features.
SSID1 Tag: Specify the VLAN tag.
WMM
This screen allows users to configure the WMM (Wireless Multi-Media) settings of the access point
under AP mode.
Wireless WDS Bridge Mode
When WDS mode is selected, the access point functions as a wireless bridge and is able to wirelessly
communicate with other access points via WDS links. A WDS link is bidirectional; both end points
must support WDS and each access point must know the MAC Address of the other. Each access
point will be configured with the remote access point’s MAC address and vice versa. Make sure all
access points are configured with the same SSID, channel and wireless encryption settings.
To Next Page
Loading...
Need help?
General
