WLAN Settings: WLAN channel.
SSID_1: SSID information.
LAN
This screen allows users to configure the LAN settings of the access point and to configure the
DHCP settings.
î
Bridge Type: Select Static IP or Dynamic IP from the drop-down list. If you select Static IP, you will
be required to specify an IP address and subnet mask. If Dynamic IP is selected, then the IP address
is received automatically from the external DHCP server.
IP Address: Specify an IP address.
IP Subnet Mask: Specify a subnet mask for the IP address.
802.1d Spanning Tree: Select Enable or Disable from the drop-down list. Enabling spanning tree
will avoid redundant data loops.
SNMP
Allows you to assign the contact details, location, community name and trap settings for SNMP. This
is a networking management protocol used to monitor network-attached devices. SNMP allows
messages (called protocol data units) to be sent to various parts of a network. Upon receiving these
messages, SNMP-compatible devices (called agents) return data stored in their Management
Information Bases.
SNMP Active: Choose to enable or disable the SNMP feature.
SNMP Version: You may select a specific version or select All from the drop-down list.
To Next Page
Loading...
Need help?
General
