mode.
Tools
Admin
You can change the password required to log into the access point’s web-based management. By
default, the password is: admin. Passwords can contain 0 to 12 alphanumeric characters, and are
case sensitive.
Current Password: Fill in the current password to allow changing to a new password.
New Password: Enter your new password and type it again in Repeat New Password for
verification purposes
Time Setting
The Time Zone allows your access point to reference or base its time on the settings configured
here, which will affect functions such as Log entries and Power Saving mode.
If the device losses power for any reason, it will not be able to keep its clock running, and will not
display the correct time once the device has been restarted. Therefore, you must re-enter the correct
date and time.
To Next Page
Loading...
